A bunch of roots of the impact of vertical steam high pressure boiler suppliers efficiency: basically all over the country are conducting high-profile coal to natural gas movement, vertical steam boiler use, very large cuts infected micro particles, the same time nitrogen oxides and other toxic gases the smoke has also been suppressed. Vertical steam boiler efficiency is a measure of critical standards, common look behind a pile of roots of the impact of vertical steam boiler efficiency. After investigation authorities, vertical steam boiler heat loss is probably due to include these two: undesirable heat loss and flue gas emissions than adequate combustion air. Emission reduction in heat loss can be retrofitted aft vertical steam boiler exhaust heat recirculation installation, or use more advanced types of condensing boiler.
July 26, 2016, Beijing, China Everbright Paper Co., Ltd. and the company signed a "split 6 tons of steam condensing gas steam high pressure boiler suppliers contract" by the company responsible for the WNS6-1.25-YQ split condensing gas boiler steam to all production, installation and commissioning work. The product is the use of condensing technology, effective emission of harmful substances SOx, NOx, COx, is industrial boilers efficient and environmentally friendly solutions.
1, the safety valve should be mounted vertically in a high position in the pot business, set box.
2, between the safety valve and the drum or header, not equipped with access to the steam outlet pipe and the valve.
3, the lever-type safety valve should prevent movement of the self-apparatus and the weight limit leverage deviant guide tube, a spring safety valve should lift and handle means for preventing movement of the adjustment screw is screwed lightly.
4, the rated steam pressure less than or equal to 3.82MPa gas steam boiler safety valve throat diameter of not less than 25mm; power greater than the rated steam pressure 3.82MPa boiler safety valve throat diameter not less than 20mm.
5, the safety valve and coal-fired steam boiler tubes, the cross-sectional area not less than the cross-sectional area of the valve inlet. If several valves installed together with a short tube directly connected to the drum, the cross-sectional area of the passage should not step short tube to 1.25 times the area of all the exhaust valve.
6, the safety valve should normally be installed exhaust pipe, exhaust pipe should be through a safe place, and there is sufficient cross-sectional area to ensure the smooth flow of exhaust.
7, the safety valve exhaust pipe at the bottom should have received a place of safety posturing of drainage pipe, the exhaust pipe and drainage pipe not allow the installation of the valve.
8, rated evaporation to 0.5t h coal-fired steam boiler /, at least two safety valves installed; Rated evaporation 0.5t h less than or equal to electric boiler /, mounted on at least a safety valve.
Second, grasp the "coal to gas," the key link.
1, removal of the original coal-fired boiler slag machine, coal hopper, coal equipment, chain grate, gearbox and so on.
2, by calculating the heat transfer in the furnace, the furnace geometry is determined, the center position of the furnace flame. Re-casting furnace, the furnace using the refractory castable
